Working Mode: Voltage and current dual display, 2-wires
Color Of Housing: Black
Measuring Range: AC200-450V, 0-200A (with sensor transformer)
Display: LCD, blue backlight, 3 digits
Accuracy: 1% +/- 2 digits
Power Consumption: <0.2 VA
Measurement Speed: about 2 times / sec
Installation Size: 68x38 mm (flush mounting)
Sensor Pore size: 24mm
Can directly replace the 85L17 Analog current and voltage meter
Usage:Power distribution box, distribution cabinet, regulators, teaching aids, household small distribution box and etc.
1, Connect current loop
2, Connect the AC power supply
3, Please do not touch any components and circuit,to avoid electric shock
1x Digital AC Volt Amp Meter
1x Sensor Transformer
Input voltage: 12V/ 24V
Power mode: cigarette lighter power
Display color: Red+Blue; Red+Green; Red+Red
1.Auto battery voltage monitor
Firstly, plug the gauge into car cigarette lighter socket and its screen will display voltage of auto battery
Secondly, the volt/temp gauge could be used in 12V car or 24V truck/ motor coach
2.Temperature tester inside your cars
Firstly, its testing range should be within 10-170 ℉
Secondly, to gain accurate temperature, the temp sensor is set outside of the temp gauge. You can bend the sensor to avoid
heating parts of car in your usage.For example, you can bend the sensor to avoid direct sunshine.
1pcs Auto Volt Temp Gauge
Connections: The terminal marked "+" is for positive volts. The terminal marked "-" is for ground. These must be hooked up for the indicator to record battery usage. With only these two terminals hooked up, there will be no display showing. This is done to conserve battery power, but the meter is monitoring the batteries When you want to see the display, connect the terminal marked "C" to a positive volt source (+ and - terminals should still be connected). "C" can be hard wired to have the display showing all of the time or can be used through a momentary contact switch to see the battery status by depressing the momentary contact switch. Another method for installation would be to connect "C" to a terminal coming from a switch key that goes hot when the key is turned on. Remember that + and - must always be connected. Dimensions: Overall: Width 2 1/16" ; Height 1 1/4" Hole cutout - 1 3/8" wide by 7/8" high Depth Behind front meter flange to end of mounting screws - 1 1/8 inches
Product Description: 1--This round hour meter can be used for tracking time on machinery such as boats, cars, trucks, tractors or any other device where time is used to determine oil change intervals, service requirements or where there is a need to record hours operated. 2---These meters are 100% tested at the factory prior to shipment. They will have from 0.2 to 2.0 hours on them depending on the random quality control test selection process. This is done to insure that a quality meter is being shipped. 3---The timer has a 6 digit display with the least significant digit being 1/10 hour (99999.9) and operates on in put voltages from 6 to 80 Volts DC. 4---The hour meter timing mechanism contains a quartz oscillator which provides a high degree of accuracy. It is designed to withstand vibration and shaking up to 8g and is rated to work between 15 degrees to 132 degrees Farenheit. 5---The hour meter fits in to a 2" round hole and includes an adjustable retrainer clip so that the meter can be mounted on material up to 9/32 inch thick. Meter depth behind the panel is 1.5 inches.
Measure range: DC 2.5-30.0V
Minimum input: DC 2.5V
Maximum input: DC 30V
Min input: DC 2.5V
Permissible Error: 1%; + / - 1 digit(its accuracy is 0.01V when in less than 10V and 0.1V when in more than 10V)
Display: three 0.40" LED digital tube
Refresh rate: about 200mS
Power supply: requires no extra power supply
Current consumption: about 5-20mA
Operating temperature: -10 °c ~ 65 °c
1.The volt meter adopts epoxy potting design; it is waterproof, anti-oil, moistureproof, shockproof and dust-proof
2.Connect the red wire to positive pole of measured voltage and black wire to negative pole of measured voltage
3.It requires low voltage to start working which is more convenient for lithium and 18650 battery users
4.Its digital point is moveable in accordance with your measured voltage; specifically, it will display two digits
after the decimal point when voltage is less than 10V and display one digit after the decimal point when volt is more
Do not need power supply, can measure 2.5-30V directly
If the input voltage is below 3.5V, the display brightness dims
If the input voltage is below 2.5V,measuring inaccurate or no display
If measure 10V below, accurate to 0.01V,display x.xx
If measure 10V or more,accurate to 0.1V,display xx.x
Please don't use this meter in 24V battery because when the battery is full-charged, its voltage will be about 30V(the max input volt for this meter),
and we don't suggest you use it in max volt of 30V
1x Digital Voltmeter
Brand new and high quality.
Screen digital color: red.
Installment: insert the jack of the product into a cigar socket.
This digital gauge displays the voltage of batteries in the car.
With high brightness of LED there is no difficulty in seeing the display.
Powered by car cigarette lighter charger.
Constantly monitor battery voltage, extend and protect the battery and engine life.
Installment:Clean the Cigar socket.
Insert the jack of the product into a Cigar socket. Attention:For DC 12V OR 24V CAR.
Measuring range:DC 8V-30V+/-%1.2.
What kind of batteries is healthy:.
When engine running(do not drive), the LED display:.
Between 13.5 to 14.5 (12V Car). Between 26.0 to 28.0 (24V Car).
Size:7cm x 4cm x 2.9cm - 2.76inch x 1.57inch x 1.14inch.
1 x Car voltage monitor
NO Retail Box. Packed Safely in Bubble Bag.
It's brand new, good quality & high performance;
Blue LED Digital Volt mini Panel Meter;
Doesn't Require a additional working Power;
It only have two wires, you can connect to the measure power directlyIt have the polarity reverse protection, won't damage the meter;
TYPE : LED;
Power range : DC 4.2 V - 30 V ;
Current consumption : 12mA ;
Accuracy : 0.1V;
Led Size : 0.56'';
Meter Size : 48mm x 29mm x 21mm;
Hatch size : 45.5mm × 26.5mm;
Working temperature : -10℃~65℃;
The max measure voltage is 30V, please do not exceed 30V, otherwise, the meter would be damaged;
1 x 4.5V-30V Bule LED Digital Volt Meter.
040 Waterproof Digital, 1961 1962 Corvette, 1962 Corvette Voltmeter, 1968 1972 Corvette, 1972 1974 Corvette, 1972 Corvette Voltmeter, 1974 Corvette Voltmeter, 1977 Corvette Voltmeter, 30V Led Panel, 45 30V Led, 48 Volt Ezgo, Amp Volt Multimeter, Apc Volt Meter, Authority Llc 48, Automotive Authority Llc, Cigarette Lighter Voltage, Corvette Voltmeter Gauge, Dc 25 30V, Dc 45 30V, Digital Ac Amp, Digital Panel Meter, Digital Volt Temp, Digital Voltmeter Dc, Drok 040 Waterproof, Drok Digital Ac, Drok Digital Volt, Ezgo Club Car, Hour Meter Boat, Lcd Cigarette Lighter, Meter Boat Tractor, Mini Wire Dc, Multimeter Ammeter Voltmeter, Multimeter Red Led, Niceeshoptm Mini Wire, Panel Meter Volt, Quartz Trim Ring, Red Led Panel, Ring Hour Meter, Temp Multimeter Red, Tms Quartz Trim, Volt Ezgo Club, Volt Meter Gauge, Volt Multimeter Ammeter, Voltage Digital Panel, Voltmeter Dc 25