Keep your eyes on the road
At 65 mph, looking down for a second to check the speedometer means driving blind for 95 feet. Many accidents start during the time a driver glances down and fails to see sudden traffic changes ahead. Now, drive safely by never looking down to check speed again with the GPS Head-Up Display Speedometer. You may also set overspeed warning with the touch of a button. When the preset speed limit is exceeded, a visual indicator lights up and an optional alarm beeps (for up to 15 seconds) to remind you of the speed limit.
Know your true speed
The HUD uses GPS to determine the true speed of the vehicle. There are several reasons why there may be a difference between the speed displayed on the car's speedometer and the HUD. These include:
- calibration set by vehicle manufacturers to read high to ensure their speedometers never indicate a lower speed than the actual speed of the vehicle
- speedometer inaccuracy due to aftermarket modifications such as different tire and wheel sizes or different differential gearing
Main unit input voltage: DC5V +/- 5%
Adapter voltage in: DC12-24V
Current draw: 450mA
Operating Temp.: -4 to 185F
Speed Ranges: 0-158MPH / 0-255Km/hr
Max. Brightness: 5,500 nits
GPS Chipset: SiRF Star III
Frequency: 1575.42MHz (L1 band, CA code)
Accuracy: 2DRMS: approx. 10m
TTFF: Cold start: 42s, Warm start: 38s, Hot start: 1s
Packing Contents: main unit, display film, cigarette lighter power adapter (DC12-24V to 5V), mounting bracket with adjustable angle, manual
- For additional display films, search for "Display Film for Vehicle Head-Up Displays".
- HUDs are designed to be displayed on the windshield. Readings read from the unit will appear as mirror images.
Wide working voltage: 5~10V.
Low current consumption: less than20mA, 5V, 2X100mW.
Wide working temperature: -40~105℃.
Extremely robust construction: Ф30mm X 7.6mm.
High μ-step resolution: 1/12°.
Directly driven by a μ-controller
Installing these motors you need good soldering skills, professional equipment and electronic knowledge working with delicate PC boards. You the buyer are responsible for installation charges and any damages incurred from the installation of the stepper motors.
These stepper motors are a direct replacement for the XC5.168, X15.168 commonly found in 2001-2006 General Motors instrument clusters.Includ following automobiles.....Buick
Wide working voltage: 5~10V
Low current consumption: less than20mA, 5V, 2X100mW
Wide working temperature: -40~105 degree centigrade
Extremely robust construction: Ф30mm X 7.6mm
High μ-step resolution: 1/12°
Directly driven by a μ-controller
Installing these motors you need good soldering skills, professional equipment and electronic knowledge working with delicate PC boards
2001-2005 Monte Carlo
2003-2005 Grand Am
2003-2005 Grand Prix
2000 2005 Chevy, 2005 Chevy Impala, Avalanche Instrument Cluster, Chevrolet Gm Gmc, Chevy Avalanche Instrument, Cluster Gauge Speedometer, Cluster Mileage Correction, Cluster Repair Service, Display Speedometer Installation, Gauge Cluster Dashboard, Gauge Cluster Mileage, Gauge Speedometer Dashboard, Gm Gmc Instrument, Gm Stepper Motors, Gps Head Up, Head Up Display, Impala Speedometer Instrument, Instrument Cluster Oem, Instrument Cluster Repair, Instrument Gauge Cluster, Motors Instrument Gauge, Odometer Instrument Panel, Panel Gauge Cluster, Qty Gm Stepper, Repair Service Chevy, Speedometer Dashboard Repair, Speedometer Instrument Cluster, Speedometer Odometer Instrument